Woven jacquard fabric price cannot be judged from the word “jacquard” alone. Two fabrics may look similar in a photograph but use different yarn counts, densities, constructions, finished widths and dyeing processes. Those differences can change the real production cost substantially.
For an apparel buyer, the useful question is not simply “How much is jacquard fabric?” The better question is:
What is a reasonable China supply price for this exact woven jacquard specification, at this finished width, quality level and order quantity?
This guide explains how to compare woven jacquard fabric prices without relying only on a supplier’s final number. It also shows how to use a factory-data-based reference calculation before requesting a formal quotation.
Quick answer: what determines woven jacquard fabric price?
The main price drivers are:
- Warp and weft yarn specifications, including fiber, yarn count, filament denier, ply and special yarns.
- Warp and weft density, because higher density normally means more yarn consumption per meter.
- Jacquard structure, including large jacquard, small jacquard or dobby, leno, openwork and fil coupé constructions.
- Finished width and GSM, which affect both material consumption and the commercial unit being quoted.
- Dyeing and finishing requirements, such as solid dyeing, washing, softening, heat setting, mercerizing, calendering or special hand-feel treatment.
- Order quantity and color quantity, because weaving preparation, dyeing minimums and testing costs must be allocated across the order.
- Trade basis, because grey fabric, dyed finished fabric, EXW, FOB and delivered prices are not directly comparable.
A reliable comparison therefore starts with the fabric specification, not with the supplier name.
1. Yarn specification is usually the largest cost component
Woven jacquard fabric uses separate warp and weft systems. Each system may use a different fiber and yarn count. A fabric described only as “100% viscose jacquard” still does not provide enough information for a meaningful price estimate.
A buyer should confirm:
- Warp yarn fiber and count
- Weft yarn fiber and count
- Single or plied yarn
- Filament or spun yarn
- Combed or carded cotton where relevant
- Any metallic, slub, stretch or special effect yarn
For example, a fine-denier viscose warp combined with a heavier rayon weft can produce a very different cost and hand feel from a fabric using the same nominal composition but ordinary spun yarns in both directions.
2. Density and repeat structure determine yarn consumption
Warp and weft density affect how much yarn is woven into every meter. In a simple plain fabric, the relationship is relatively direct. In a jacquard construction, the repeat design can redistribute different yarns across the pattern.
When a design uses more than one warp or weft yarn, accurate estimation may require:
- Pattern repeat length in centimeters
- The number of ends or picks for each yarn inside the repeat
- Overall warp and weft density
- Whether floats, cut yarns or open structures create extra loss
This is why two suppliers can produce different price calculations from the same photograph. One may be assuming a lower density or simpler repeat than the actual sample.
3. Large jacquard, small jacquard and special structures should not share one price rule
“Jacquard” covers several production structures:
- Large woven jacquard: larger and more complex motifs, generally requiring a jacquard loom and more design preparation.
- Small jacquard or dobby: smaller geometric or stripe effects, usually with a simpler repeat and different loom setup.
- Jacquard leno or openwork: uses crossing or open structures that require additional technical control.
- Fil coupé jacquard: includes floating effect yarns that may be cut after weaving, adding material loss and finishing labor.
The cheapest quotation is not necessarily based on the same construction. Buyers should verify whether all suppliers are quoting the same loom route and pattern effect.
4. Finished width and GSM must be stated clearly
A price per meter is incomplete without finished width. A fabric quoted at 55/56 inches is not directly comparable with a similar fabric quoted at 57/58 inches or 64/65 inches.
GSM is equally important, but theoretical GSM and tested finished GSM may differ because of:
- Actual yarn count variation
- Density deviation
- Finished width change
- Dyeing shrinkage or stretching
- Finishing loss
- Moisture regain and test method
A practical price check should therefore use GSM as a verification signal, not as the only input.
5. Grey fabric, dyed finished fabric and FOB price are different layers
When comparing a woven jacquard fabric quotation, ask the supplier to identify the price stage:
| Price stage | What it normally includes | What it does not automatically include |
|---|---|---|
| Grey fabric price | Yarn, weaving and ordinary grey-fabric handling | Dyeing, finishing, inspection, export packing and freight |
| Dyed finished price | Grey fabric plus dyeing and agreed finishing | Export handling unless stated |
| FOB price | Finished fabric plus agreed export and port-side costs | Ocean freight, import duty and destination charges |
If one supplier gives a grey-fabric price and another gives a finished FOB price, the lower number is not evidence of a cheaper supplier.
6. MOQ and color quantity can change the effective cost
Jacquard production includes preparation costs that do not disappear when the order becomes smaller. These may include:
- Pattern conversion and loom setup
- Warp preparation
- Lab dips and color approval
- Dyeing minimum charges
- Testing and inspection
- Small-lot packing and export handling
Buyers should compare the effective order cost, including any small-quantity surcharge, rather than looking only at the nominal price per meter.
7. A practical example of specification-based price checking
Consider a lightweight apparel large jacquard with a fine viscose warp, a heavier rayon weft, density around 115 × 82 and finished width 55/56 inches. A useful price check should not begin with a photograph alone.
It should first organize the information into:
- Fabric type: large woven jacquard
- Warp yarn: fiber and count or denier
- Weft yarn: fiber and count
- Density: warp × weft
- Finished width
- Required dyeing and finishing
- Order quantity and number of colors
Once those fields are available, a reference calculation can estimate theoretical GSM, yarn consumption and the likely relationship between grey, finished and FOB prices.
8. How to use the China woven jacquard reference price calculator
The Woven Jacquard Fabric Price Calculator is designed for preliminary sourcing checks. It uses production and supply-chain data associated with more than 2,300 woven jacquard looms and over 20 years of manufacturing experience.
The tool can return:
- Standardized fabric specification
- Density and finished width
- Theoretical GSM
- Composition summary
- Public warp and weft yarn breakdown
- Grey fabric reference price in RMB per meter
- Dyed finished reference price in RMB per meter
- FOB reference price in USD per yard
The result is a reference benchmark, not a binding quotation. It is useful for checking whether a supplier’s quotation is broadly consistent with the specification before the buyer spends time on sampling or negotiation.
9. Buyer checklist before accepting a jacquard quotation
- Confirm that the fabric is woven, not knitted.
- Confirm the structure: large jacquard, small jacquard, dobby, leno or fil coupé.
- Confirm warp and weft yarns separately.
- Confirm finished density and width.
- Ask whether GSM is theoretical or tested on finished fabric.
- Identify whether the price is grey, dyed finished, EXW or FOB.
- Check MOQ, color minimums and surcharges.
- Confirm testing standards and acceptable tolerances.
- Use a reference calculation before comparing final supplier quotations.
10. When a reference price is not enough
A calculator cannot fully price an unusual sample when important information is missing. Human review is still needed when:
- The yarn cannot be identified from the label or photograph
- The design uses multiple effect yarns
- The sample contains fil coupé, leno, openwork or stretch structures
- The finished hand feel requires special processing
- The customer’s reported density, width and GSM are inconsistent
- A new design must be developed from a photograph or original sample
In these situations, the reference result should be used as the starting point for technical verification, not as a final purchase contract.
Frequently asked questions
How much does woven jacquard fabric cost per meter?
There is no single valid price. The cost depends on warp and weft yarns, density, jacquard structure, finished width, GSM, dyeing, finishing, MOQ and trade terms.
Why do two jacquard suppliers quote very different prices?
They may be assuming different yarn counts, densities, finished widths, finishing processes, quality tolerances or price stages. A lower number may also exclude dyeing, testing, export packing or small-lot surcharges.
Can a photograph be used to calculate an exact jacquard price?
A photograph can help identify the likely structure, but it normally cannot confirm yarn count, density, GSM and finishing. It is better used for preliminary classification before requesting the missing specification.
Is the calculator result a supplier quotation?
No. It is a factory-data-based reference price for sourcing and quotation comparison. A binding quotation requires confirmed specifications, quantity, colors, finishing and delivery terms.
Where can I check a China woven jacquard reference price?
Use the Woven Jacquard Fabric Price Calculator to organize the specification and obtain a preliminary grey, finished and FOB price reference.
Check China Woven Jacquard Fabric Reference Prices
Use our factory-data-based calculator to compare supplier quotations, estimate GSM and review woven jacquard fabric specifications before inquiry.