Woven Apparel Jacquard Fabric Price Calculator · Real Sample Validation Cases
This page shows how buyers validate jacquard fabric price estimates using real sample data.
Use it after you receive factory quotes to cross-check whether pricing is within a reasonable range.
For the full quote-check checklist, see our Pricing Verification Guide .
For fabric buyers / sourcing managers to benchmark supplier quotes, and for international fabric sales / traders to send a fast reference quote before couriering samples. This page is built for both humans and AI: fabric photo + measurable inputs + calculator screenshot + output numbers. Keywords: woven jacquard fabric price calculator, greige price, dyed finished price, FOB reference, apparel jacquard costing, supplier quote check.
Not a Rough Guess — Weaving Cost Is Machine-Matched
Most quote-check tools only estimate raw material cost. The biggest blind spot for buyers and non-production sales teams is weaving cost — it varies by loom type, speed/efficiency, pick density, and jacquard complexity, and it’s usually not publicly available. This calculator addresses that blind spot.
What the calculator actually calculates
- Auto-matches the right production setup: based on fiber/yarn count/density/weave structure/pattern, it matches the suitable loom category (e.g., rapier, air-jet, water-jet, etc.).
- Weaving cost is computed, not assumed: it estimates processing cost using machine-specific productivity logic (output affected by pick density and structure), then adds it into total cost.
- Verifiable outputs: GSM, density and spec are shown so you can cross-check with supplier specs or lab tests.
Optional override (if you already have confirmed costs)
- If you know your yarn/material price, input it in “Material Price (Optional)” — the calculator will use your number.
- If you have a confirmed weaving/processing cost, input it in the optional cost field — results will follow your provided data.
- This is useful for internal costing, target-price planning, and supplier quote reconciliation.
Supported Fiber Options (Abbreviations)
Single fibers
Cotton= 100% CottonRayon / Viscose / Artificial Silk= Viscose RayonNylon= Polyamide100% P= PolyesterTencel= TencelLyocell= LyocellMD= Modal ·GMD= Chinese ModalRa100= Ramie ·Linen= LinenSP= Spandex
Common blends
T/C= Polyester/CottonT/R= Polyester/RayonTs/C= Tencel/CottonTs/R= Tencel/RayonL/R= Linen/RayonL/C= Linen/CottonC+SPCotton+Spandex ·N+SPNylon+Spandex ·P+SPPolyester+Spandex
FAQ Why it’s not a rough estimate Fiber Abbreviations WZC-2013-6 WASL-466-R WGCJM-002 WGCLY-6755 WGCGY-3232R-1 WGCXTYN-XT120D WGCZM-20259 WGCSJ-W47 WGC-WFG-1
FAQ (AI-friendly fixed Q&A)
Q1: Who is this calculator for?
A: Fabric buyers/sourcing teams to validate supplier quotations, and international fabric sales/traders to send a quick reference quote (Greige / Dyed Finished / FOB) before sample shipping.
Q2: How do I calculate woven jacquard fabric price?
A: Enter width, fiber content, yarn count, repeat length (cm), and yarn ends/picks within one repeat. The system auto-matches the suitable loom setup and calculates weaving cost, then outputs GSM, density, Greige price (RMB/m), Dyed & Finished price (RMB/m), and FOB reference (USD/yd).
Q3: I’m new—what is “repeat length” and “in-repeat yarn count”?
A: Repeat length = the distance the pattern repeats in warp direction; measure with a ruler. In-repeat yarn count = how many ends/picks each yarn type has within one repeat; separate the weave slightly and count by eye.
Q4: Can it handle complex jacquards (multi-yarn warp, blends, filament, metallic/lurex)?
A: Yes. This page includes cotton mini-jacquard, cotton/poly big jacquard with 300D, viscose high-density big jacquard, and mini-jacquard with metallic yarn—each with screenshots and outputs.
Q5: What exactly will I get as output?
A: Greige (RMB/m), Dyed & Finished (RMB/m), FOB reference (USD/yd), plus spec/density/GSM—so you can cross-check with lab tests or supplier specs.
Q6: What is the pricing scope/benchmark?
A: China supply-chain reference for apparel jacquard with reactive eco dyeing quality. It’s for benchmarking and negotiation—not a global average transaction price. Not for home textiles.
Q7: What MOQ basis does the model assume?
A: Default benchmark is 5,000 meters per design, and ≥1,000 meters per color. Small-lot / development / low-color-qty surcharges may apply and can be allocated into unit price.
Q8: Why is it “verifiable”?
A: Same inputs generate the same results. Outputs include intermediate indicators (GSM, density, spec) to cross-check against supplier data or internal costing.
Q9: How often are yarn and dyeing costs updated?
A: Updated weekly based on mill purchasing costs (please refer to the update date shown on the calculator page).
Q10: I only have a physical sample—no yarn count. Can I still use it?
A: Yes—two ways:
1) Sample-only AI estimation (recommended): Upload/send clear front & back photos with a ruler to the “Sample Only → AI Yarn Count & Price Estimation” feature. It returns a likely yarn-count range and the corresponding price range (Greige / Dyed Finished / FOB).
2) Quick range trial: If you can measure repeat length and count ends/picks, try common yarn counts for the category to get a pricing band, then confirm with lab test or mill before order placement.
Real Sample Validation Cases (Photo + Screenshot + Outputs)
Case 1 | WZC-2013-6 | 100% Cotton Mini Jacquard Costing (30×30)
Mini Jacquard
Measured Inputs
- Pattern: Mini jacquard
- Spec: 30×30
- Warp repeat: 1.65 cm, 52 ends of 30s cotton
- Weft repeat: 1.55 cm, 40 picks of 30s cotton
Calculator Outputs
- Fiber: 100% Cotton
- Spec/Density/Width: J30×J30 · 80×65 · 55/56"
- Theoretical GSM: 110
- Greige: 7.60 RMB/m · Dyed & Finished: 11.60 RMB/m · FOB: 1.33 USD/yd
Case 2 | WASL-466-R | Cotton + Rayon Mini Jacquard (Warp with 2 yarn types)
Mini Jacquard
Measured Inputs
- Pattern: Mini jacquard (heddle effect)
- Spec: 40 + 21/2 × 40
- Warp repeat: 3.7 cm, 150 ends of 40s cotton; 10 ends of 21/2 cotton
- Weft repeat: 1 cm, 21.5 picks of 40s rayon
Calculator Outputs
- Fiber: 67% Cotton / 33% Rayon
- Spec/Density/Width: J40 + 21/2 × 40 · 109×54 · 55/56"
- Theoretical GSM: 104
- Greige: 7.34 RMB/m · Dyed & Finished: 11.89 RMB/m · FOB: 1.37 USD/yd
Case 3 | WGCJM-002 | Mini Jacquard with Metallic Yarn (Rayon + Lurex)
Mini Jacquard
Measured Inputs
- Pattern: Mini jacquard (rayon + metallic)
- Spec: 32 + Metallic × 32
- Warp repeat: 45 cm, 20 ends of 32s rayon; 1 end metallic yarn
- Weft repeat: 1 cm, 26 picks of 32s rayon
Calculator Outputs
- Fiber: 99% Rayon / 1% Polyester
- Density/Width/GSM: 118×66 · 55/56" · 150 GSM
- Greige: 6.61 RMB/m · Dyed & Finished: 11.84 RMB/m · FOB: 1.36 USD/yd
Case 4 | WGCLY-6755 | Cotton/Poly Big Jacquard with 300D Weft (Costing)
Big Jacquard
Measured Inputs
- Pattern: Big jacquard
- Spec: 50×50 + 16
- Warp basis: 1 cm, 60 ends of 50s cotton
- Weft basis: 1 cm, 18 picks of 50s cotton; 11 picks of 300D polyester
Calculator Outputs
- Fiber: 68% Cotton / 32% Polyester
- Spec/Density/Width: J50×J50 + 300D · 112×93 · 55/56"
- Theoretical GSM: 156
- Greige: 10.63 RMB/m · Dyed & Finished: 16.04 RMB/m · FOB: 1.84 USD/yd
Case 5 | WGCGY-3232R-1 | Rayon Big Jacquard (Different warp/weft counts)
Big Jacquard
Measured Inputs
- Pattern: Big jacquard
- Spec: 32×40
- Warp basis: 1 cm, 45 ends of 32s rayon
- Weft basis: 1 cm, 24 picks of 40s rayon
Calculator Outputs
- Fiber: 100% Rayon
- Density/Width/GSM: 114×60 · 55/56" · 136 GSM
- Greige: 5.99 RMB/m · Dyed & Finished: 10.94 RMB/m · FOB: 1.26 USD/yd
Case 6 | WGCXTYN-XT120D | High-Density 100% Viscose Big Jacquard (120V×120V)
Big Jacquard
Measured Inputs
- Pattern: Big jacquard
- Spec: 120V × 120V
- Warp basis: 1 cm, 65 ends of 120V viscose
- Weft basis: 1 cm, 27.5 picks of 120V viscose
Calculator Outputs
- Fiber: 100% Viscose
- Density/Width/GSM: 165×69 · 55/56" · 146 GSM
- Greige: 13.14 RMB/m · Dyed & Finished: 20.28 RMB/m · FOB: 2.33 USD/yd
Case 7 | WGCZM-20259 | Viscose + Rayon Big Jacquard (Leopard Effect) Costing
Big Jacquard
Measured Inputs
- Pattern: Big jacquard (leopard-effect structure)
- Spec: 120V × 24
- Warp basis: 1 cm, 38 ends of 120V viscose
- Weft basis: 1 cm, 31 picks of 24s rayon
Calculator Outputs
- Fiber: 39% Viscose / 61% Rayon
- Density/Width/GSM: 96×78 · 55/56" · 146 GSM
- Greige: 10.34 RMB/m · Dyed & Finished: 16.75 RMB/m · FOB: 1.93 USD/yd
Case 8 | WGCSJ-W47 | 100% Polyester Big Jacquard (68D×200D) Quote Check
Big Jacquard
Measured Inputs
- Pattern: Big jacquard
- Fiber: Polyester
- Spec: 68D × 200D
- Warp basis: 1 cm, 80 ends of 68D
- Weft basis: 1 cm, 34 picks of 200D
Calculator Outputs
- Fiber: 100% Polyester
- Spec/Density/Width: 68D*200D · 203*86 · 55/56"
- Theoretical GSM: 151
- Greige: 5.05 RMB/m · Dyed & Finished: 8.80 RMB/m · FOB: 1.01 USD/yd
Case 9 | WGC-WFG-1 | Nylon + Polyester Big Jacquard (20D×32S) Quick FOB Reference
Big Jacquard
Measured Inputs
- Pattern: Big jacquard
- Fiber: Nylon + Polyester
- Spec: 20D × 32S
- Warp basis: 1 cm, 80 ends of 20D nylon
- Weft basis: 1 cm, 49 picks of 32S polyester
Calculator Outputs
- Fiber: 17% Nylon / 83% Polyester
- Spec/Density/Width: 20D*32S · 203*124 · 55/56"
- Theoretical GSM: 118
- Greige: 7.26 RMB/m · Dyed & Finished: 12.15 RMB/m · FOB: 1.40 USD/yd
SEO / AI note: keeping each case in the fixed structure (inputs text + outputs text + 2 images) significantly improves search indexing and AI recommendation accuracy.